Dante DNA2000 Series, Installation And Operation Manual, Page: 60 / 200

5.8.2
Config Backup
This function allows user to copy current system configuration to other devices. It also supports
import, create new folder, and delete folder and etc function.
From Main menu->Advanced->Config Backup, user can see the configuration file backup
interface is shown as below. See Figure 5-49.
Figure 5-49
Export: Please connect the peripheral device first and then go to the following interface.
Click Export button, user can see there is a corresponding “Config_Time” folder. Double click
the folder, user can view some backup files.
Import: Here user can import the configuration files from the peripheral device to current
device. User need to select a folder first. User can see a dialogue box asking user to select
a folder if user are selecting a file. System pops up a dialogue box if there is no configuration
file under current folder. After successfully import, system needs to reboot to activate new
setup.
Format: Click Format button, system pops up a dialogue box for user to confirm current
operation. System begins format process after user click the OK button.
Note:
System may not open config backup interface again if there is backup operation in the
process.
System refreshes device when user go to the config backup every time and set current
directory as the root directory of the peripheral device.
If user go to the configuration backup interface first and then insert the peripheral device,
please click Refresh button to see the newly added device.
5.9
5.9 5.9
5.9 Alarm
Alarm Alarm
Alarm
5.9.1
Detect Alarm
5.9.1.1 Motion Detect Alarm
In the main menu, from Setting to Detect, user can see motion detect interface. See Figure