Dante DNA2000 Series, Installation And Operation Manual, Page: 50 / 200

Figure 5-40
d) From Mani menu->Setting->Schedule, user can go to Figure 5-36.
e) Select alarm channel, period and the record type shall be alarm. Please refer to chapter
5.6.2.
f) Click Copy button to copy current setup to other channel(s).
g) Click OK button to save alarm record information.
5.6.5.2 Alarm Snapshot
a) Please refer to Step a) to step c) of chapter 5.6.4.2 to enable timing snapshot.
b) From Main menu->Setting->schedule, user can go to Figure 5-36 to enable snapshot
function.
c) From Main menu->Setting->Alarm, user can go to Figure 5-40.to set alarm parameter
and enable snapshot function.
d) Click Save button to save alarm snapshot setup.
5.6.6
5.6.6 5.6.6
5.6.6 M
M M
Manual Record/Snapshot
anual Record/Snapshot anual Record/Snapshot
anual Record/Snapshot
User need to have proper rights to implement the following operations. Please make sure the
HDD has been properly installed.
5.6.6.1 Manual Record
a) Right click mouse or in the main menu, Advanced->Manual Record. Manual record
menu is shown as in Figure 5-41.
Tips
User can click Rec. button on the front panel (if possible) to go to the Manual Record interface.