Dante DNA2000 Series, Installation And Operation Manual, Page: 37 / 200

Figure 5-18
Now user can set corresponding information.
Transparency: Here is for user to adjust transparency. The value ranges from 128 to 255.
Channel name: Here is for user to modify channel name. System max support 25-digit (The
value may vary due to different series). Please note all user modification here only applies to
NVR local end. User need to open web or client end to refresh channel name.
Time display: User can select to display time or not when system is playback.
Channel display: User can select to channel name or not when system is playback.
Resolution: There are four options: 1280
×
1024(default),1280
×
720,1024
×
768,800
×
600.
Please note the system needs to reboot to activate current setup.
Click OK button to save current setup.
Note
The display parameter here has no effect on the record file and playback effect.
5.4.5
5.4.5 5.4.5
5.4.5 Preview Parameter
Preview Parameter Preview Parameter
Preview Parameter
Set preview display mode, channel display sequence and tour setup.
Set preview display mode: On the preview interface, right click mouse, user can view
right-click menu. Now user can select preview window amount and channel.
Set channel display mode: On the preview interface, if user wants to change channel 1 and
channel 16 position, please right click channel 1 video window and then drag to the channel
16 video window, release button, user can change channel 1 and channel 16 position.
Tour setup: Here user can set preview window channel display mode and interval. Please
follow the steps listed below.
From Main menu->Setting->Display, user can see an interface shown as in Figure 5-19.
Here user can set tour parameter.
Enable tour: Check the box here to enable tour function.
Interval: System supports 1/4/8/9/16-window tour. Input proper interval value here. The value
ranges from 5-120 seconds. In tour process, user can use mouse or click Shift to turn on