Dante DNA2000 Series, Installation And Operation Manual, Page: 161 / 200

Parameter Function
Channel Please select a channel from the dropdown list.
Pre-record Please input pre-record time here. The value ranges from 0 to 30.
Redundancy Check the box here to enable redundancy function. Please note this
function is null if there is only one HDD.
Snapshot Check the box here to enable snapshot function.
Holiday Check the box here to enable holiday function.
Setup Click the Setup button, user can set record period. See Figure 7-81.
There are six periods in one day. If user do not check the date at the
bottom of the interface, current setup is for today only.
Please click Save button and then exit.
Copy Copy function allows user to copy one channel setup to another. After
setting in channel, click Copy button, user can go to interface Figure
7-82. User can see current channel name is grey such as channel 1.
Now user can select the channel user wants to paste such as channel
5/6/7. If user wants to save current setup of channel 1 to all channels,
user can click the first box “ALL”. Click the OK button to save current
copy setup. Click the OK button in the Encode interface, the copy
function succeeded.
7.9.4.2 HDD Manager
7.9.4.2.1 Local Storage
The local interface is shown as in Figure 7-83. Here user can see HDD information. User can also
operate the read-only, read-write, redundancy (if there are more than one HDD) and format
operation.
Figure 7-83
7.9.4.2.2 HDD
The HDD interface is to set HDD group. See Figure 7-84.
Figure 7-84