window switch function.
Stands for opening switch function,
stands for closing
switch function.
Monitor tour type: System support 1/8-window tour.
Alarm tour type: System support 1/8-window tour.
Figure 5-19
In tour mode, user can see the following interface. On the right corner, right click mouse or click
shift button, user can control the tour. There are two icons:
stands for enabling window switch
and
stands for disabling window function. See Figure 5-20.
Figure 5-20
Click Save button to save current setup.
5.5
5.5
5.5
5.5
PTZ
PTZ
PTZ
PTZ
Note:
All the operations here are based on PELCOD protocol. For other protocols, there might
be a little difference.
Cable Connection
Please follow the procedures below to go on cable connection
Connect the dome RS485 port to NVR 485 port.
Connect dome video output cable to NVR video input port.
Connect power adapter to the dome.
In the main menu, click setting, and then click Pan/Tilt Control button. The interface is shown
as in Figure 5-21. Here user can set the following items:
Summary of Contents for DNA2000 Series
