PC-based Configuration Tool MCT 10 Set-up Software
All adjustable frequency drives are equipped with a serial
communication port. Danfoss provides a PC tool for
communication between the PC and the Adjustable
frequency drive, PC-based Configuration Tool MCT 10 Set-
up Software.
MCT 10 Set-up Software
MCT 10 Set-up Software has been designed as an easy to
use interactive tool for setting parameters in our
adjustable frequency drive.
The PC-based Configuration Tool MCT 10 Set-up Software
is useful for:
•
Planning a communication network offline. MCT
10 Set-up Software contains a complete
Adjustable frequency drive database.
•
Commissioning adjustable frequency drives
online.
•
Saving settings for all adjustable frequency drives.
•
Replacing a Adjustable frequency drive in a
network.
•
Expanding an existing network.
•
Drives developed in the future will be fully
supported.
The PC-based Configuration Tool MCT 10 Set-up Software
supports Profibus DP-V1 via a master class 2 connection. It
makes it possible to read/write parameters online in a
Adjustable frequency drive via the Profibus network. This
will eliminate the need for an extra communication
network. See
Instruction Manual, MG.33.Cx.yy and MN.
90.Ex.yy
for more information about the features supported
by the Profibus DP V1 functions.
Save Drive Settings:
1.
Connect a PC to the unit via the USB com port.
2.
Open PC-based Configuration Tool MCT 10 Set-up
Software
3.
Choose “Read from drive”
4.
Choose “Save as”
All parameters are now stored on the PC.
Load Drive Settings:
1.
Connect a PC to the unit via the USB com port.
2.
Open PC-based Configuration Tool MCT 10 Set-up
Software
3.
Choose “Open”. Stored files will be shown.
4.
Open the appropriate file.
5.
Choose “Write to drive”.
All parameter settings are now transferred to the
Adjustable frequency drive.
A separate manual for the PC-based Configuration Tool
MCT 10 Set-up Software is available.
The PC-based Configuration Tool MCT 10 Set-up Software
modules
The following modules are included in the software
package:
MCT 10 Set-up Software
Setting parameters
Copy to and from adjustable frequency drives
Documentation and print out of parameter
settings incl. diagrams
Ext. User Interface
Preventive Maintenance Schedule
Clock settings
Timed Action Programming
Smart Logic Controller Set-up
Table 5.41
Ordering number:
Please order the CD containing the PC-based Configuration
Tool MCT 10 Set-up Software using code number
130B1000.
MCT 10 Set-up Software can also be downloaded from the
Danfoss webpage:
http://www.danfoss.com/BusinessAreas/
DrivesSolutions/Softwaredownload/DDPC+Software
+Program.htm
.
5.5.3 MCT 31
The MCT 31 harmonic calculation PC tool enables easy
estimation of the harmonic distortion in a given
application. Both the harmonic distortion of Danfoss
adjustable frequency drives as well as non-Danfoss
adjustable frequency drives with different additional
harmonic reduction devices, such as Danfoss AHF filters
and 12-18 pulse rectifiers, can be calculated.
Ordering number:
Please order your CD containing the MCT 31 PC tool using
code number 130B1031.
MCT 31 can also be downloaded from the Danfoss
Internet:
http://www.danfoss.com/BusinessAreas/DrivesSo-
lutions/Softwaredownload/DDPC+SProgram.htm
.
How to Install
VLT
®
HVAC Drive Design Guide
MG11BB22 - VLT
®
is a registered Danfoss trademark
5-33
5
5
