130BA191.10
1
Auto
on
Reset
Hand
on
Off
Menu
Status
Quick
Setup
Main
Menu
Back
2
3
4
OK
On
Alarm
Warn.
Setup
Status Mode
Displays the status of the frequency converter or the motor.
If an alarm occurs the NLCP automatically switches to status
mode.
A number of alarms can be displayed.
NOTE
Parameter copy is not possible with LCP 101 Numerical Local
Control Panel.
130BP077.10
22.8
rpm
Setup 1
Setup 1
130BP078.10
A 17
Main Menu/ Quick Setup is used for programming all
parameters or only the parameters in the Quick Menu (see
also description of the LCP 102 earlier in this chapter).
The parameter values can be changed using the [
▲
] [
▼
] keys
when the value is flashing.
Select Main Menu by pressing [Menu] key a number of times.
Select the parameter group [xx-__] and press [OK]
Select the parameter [__-xx] and press [OK]
If the parameter is an array parameter select the array
number and press [OK]
Select the wanted data value and press [OK]
Parameters with functional choices display values such as [1],
[2], etc. For a description of the different choices, see the
individual description of the parameters in the
Parameter
Selection
section
[Back] for stepping backwards
Arrow [
▲
] [
▼
] keys are used for manoeuvring between
commands and within parameters.
130BP079.10
M enu
S ta tus
Q uick
S etup
M ain
M enu
P 2-03
S etup 1
How to Programme
FC 300 Programming Guide
20
MG.33.MB.02 - VLT
®
is a registered Danfoss trademark
2
2
