Danfoss FC Drive LCP Display Layout
Danfoss FC drives have a total of 5 possible variables that can be set up and displayed to
the user. There is also a 3 word status line at the bottom of the display. The status line
tells you what the drive is doing, or being commanded to do.
These displays are very powerful tools for setting up and troubleshooting a system. It is
good practice to set them up when commissioning a drive. They are labeled “Display
Line 1.1 Small (P 0-20), “Display Line 1.2 Small (P 0-21), “Display Line 1.3 Small (P
0-22), Display Line 2 Large (P 0-23) and Display Line 3 Large (P 0-24).
The illustration below shows the layout of the displays. You can display the variables in
several different ways.
Refer to the next page for the available display choices.
NOTE: Any variable that is being displayed on the LCP can also be shown as a graph using
Quick Menu “Q6 Loggings”
1
177R0521-VLT_Aqua_Drive_Training_Handout_BODY.indd 1
4/29/15 2:47 PM