VLT Aqua Drive Lab # 1
Introduction
In this lab you will set up a VLT Aqua drive to operate in “Hand Mode”. This is the
simplest form of operation and consists of using the drives LCP to operate the
drive manually. You will use the 12 parameter quick setup menu to set up the
basic parameters required for local control.
Behavioural Objectives
¾
Learn how to access the FC-202’s software quick menus
¾
Program & understand the 12 “Quick Setup” parameters
¾
Run an “AMA” sequence to fine tune the connected motor
¾
Start the drive and change it’s speed using the LCP
(local control panel)
16
177R0521-VLT_Aqua_Drive_Training_Handout_BODY.indd 16
4/29/15 2:47 PM