14-89 Option Detection
Selects the behavior of the adjustable frequency drive when a
change in the option configuration is detected.
Option:
Function:
[0]
*
Protect Option
Config.
Freezes the current settings and
prevents unwanted changes when
missing or defective options are
detected.
[1]
Enable Option
Change
Changes drive settings and is used
when modifying the system configu-
ration. This parameter setting will
return to [0] after an option change.
14-90 Fault Level
Option:
Function:
[0]
*
Off
Use this parameter to customize fault levels. Use
[0] "Off" with caution as it will ignore all warnings
and alarms for the chosen source.
[1]
Warning
[2]
Trip
[3]
Trip Lock
Failure
Alarm
Off
Warning
Trip
Trip Lock
10 V low
1
X
X *
24 V low
47
X
X*
1.8V supply low
48
X
X*
Voltage limit
64
X
X*
Ground fault during ramping
14
X*
X
Ground fault 2 during cont.
operation
45
X*
X
Torque Limit
12
X
X*
Table 3.3 Table for selection of choice of action when selected alarm appear:
Parameter Descriptions
FC 300 Programming Guide
3-126
MG.33.MA.22 - VLT
®
is a registered Danfoss trademark
3
3