Z-Trak2 3D Profiler Sensors
Installation
•
35
For the host application
•
Maximize the number of image acquisition buffers.
For any switch
•
Maximize the memory allocated to internal buffers (if available).
•
Enable PAUSE frame support (if available).
It is recommended that the packet size be adjusted accordingly for optimal
performance given the network topology (with or without a switch), when using
packet sizes within 1500 to 3000 and 4000 to 8000 ranges.
For example, certain switches might perform better using a packet size of
4096 bytes instead of 9000 bytes.
In addition, with TurboDrive, a smaller to mid-size packet usually outperforms a
larger packet size.
Some Ethernet switches may produce more Pause Frame requests than expected
when Jumbo Frames is enabled. Changing the Ethernet Packet Size may minimize
Pause Frame requests from such a switch and improve overall transfer
bandwidth.
Ethernet cable category (CAT6, 7), manufacturer, quality and length can also affect performance.
For additional information, refer to the
Network Imaging Package for Sapera LT Optimization
Guide
, which is included with the installation of Sapera LT.
