Dalsa Genie Nano-CXP Series, User Manual

Page: 30 / 107

28
•
Operational Reference Genie Nano-CXP Series™
Sensor Control Category
The Genie Nano-CXP sensor controls, as shown by CamExpert, groups sensor specific parameters.
This group includes controls for frame rate, exposure time, gain, etc. Parameters in gray are read
only, either always or due to other feature settings. Parameters in black are user set in CamExpert
or programmable via an imaging application.
Features listed in the description table that are tagged as Invisible are usually for Teledyne DALSA
or third party software usage—not typically needed by end user applications. Also important,
features shown by CamExpert may change with different Genie Nano-CXP models.
Sensor Control Feature Descriptions
The following table describes these features along with their view attribute and device version. For
each feature the device version may differ for each camera sensor available.
When a Device Version number is indicated, this represents the camera software level, not a
firmware revision number. As Genie Nano capabilities evolve the device version will increase,
therefore identifying the supported function package. New features for a major device version
release will be indicated by green text for easy identification.
The description column will indicate which feature is a member of the DALSA Features Naming
Convention (indicated by DFNC), versus the GenICam Standard Features Naming Convention
(SFNC tag is not shown).