Dalsa Genie Nano-CXP Series, User Manual

Page: 46 / 107

44
•
Operational Reference Genie Nano-CXP Series™
Falling Edge FallingEdge Res et counter on falling edge of the s elected signal.
Any Edge AnyEdge Reset counter on the falling or rising edge of the
s elected s ignal
C ounter Value c ounterValue Read the c urrent value of the selected counter.
1 .0 0
E xpert
DFN C
C ounter Value At Reset c ounterValueAtReset
Stores the counter value of the s elected counter when
it was reset by a trigger or by an explicit Counter
Res et command.
1 .0 0
E xpert
DFN C
C ounter Reset c ounterReset
Res ets the s elected counter to zero. The c ounter
s tarts immediately after the reset. T o temporarily
dis able the c ounter, s et the Counter E vent Source
feature to Off.
1 .0 0
E xpert
DFN C
T imer Selector timerSelector Selects which timer to configure.
1 .0 0
E xpert
DFN C
Timer 1 Timer1 Timer 1 s elected
T imer M ode timerMode
Select the T imer mode. T he s elected Timer is Active
or Dis abled. When Disabled, the Timer c an be
c onfigured.
1 .0 0
E xpert
DFN C
Off Off The s elected Timer is Disabled.
Active Active The s elected Timer is Enabled.
T imer Status timerStatus Returns the c urrent s tate of the timer.
1 .0 0
E xpert
DFN C
Timer Idle TimerIdle The timer is idle. The CounterStartSource feature is
s et to off.
Timer Trigger Wait TimerTriggerWait The timer is waiting for a s tart trigger.
Timer Active TimerActive The timer is counting for the s pecified duration.
Timer Completed TimerCompleted The timer reached the TimerDuration count.
T imer Start Source timerStartSource
Select the trigger source to s tart the timer. The E vent
C ontrol section provides details and timing diagrams
for the s upported events.
1 .0 0
E xpert
DFN C
TimerRes et Cmd Off Starts with the reception of the TimerReset
Icommand.
Expos ure Start Expos ureStart Start Timer on Expos ure Start event.
Expos ure End Expos ureEnd Start Timer on Expos ure End event.
Readout Start ReadoutEnd Start Timer on Readout Start event.
Readout End ReadoutStart Start Timer on Readout End event.
Frame Start FrameStart Start Timer on Frame Start event.
Frame Trigger ValidFrameTrigger Start Timer on Frame Trigger event.
CXP CXP Start Timer on a trans ition of I/O CXP trigger event.
Timer 1 End Timer1End Start Timer on Timer 1 End event.
Counter 1 End Counter1End Start Timer on Counter 1 End event.
T imer Line Activation timerStartLineActivation
Select the trigger activation mode which s tarts the
timer.
1 .0 0
E xpert
DFN C
Ris ing Edge Ris ingEdge Starts counter on ris ing edge of the s elected s ignal.
Falling Edge FallingEdge Starts counter on falling edge of the s elected signal.
Any Edge AnyEdge Starts counter on the falling or rising edge of the
s elected s ignal.
T imer Duration timerDuration
Sets the duration (in microseconds) of the timer
puls e.
1 .0 0
E xpert
DFN C
T imer Value timerValue
Reads the current value (in microseconds) of the
s elected timer.
1 .0 0
E xpert
DFN C
T imer Reset timerReset
Res ets the timer to 0 while timerStatus=TimerActive.
T imer then waits for the next timerStartSource event.
1 .0 0
E xpert
DFN C