Dalsa Genie Nano-CXP Series, User Manual

Page: 44 / 107

42
•
Operational Reference Genie Nano-CXP Series™
Counter and Timer Control Feature Description
The following table and block diagram, describes these parameters along with their view attribute
and minimum camera firmware version required. Additionally the Device Version column will
indicate which feature is a member of the DALSA Features Naming Convention (indicated by
DFNC), versus the GenICam Standard Features Naming Convention (SFNC tag is not shown).
The Device Version number represents the camera software functional group, not a firmware
revision number. As Nano-CL capabilities evolve the device version tag will increase, therefore
identifying the supported function package. New features for a major device version release will be
indicated by green text for easy identification.
Display Nam e Feature & Values Description Device
Version
& View
C ounter Selector c ounterSelector Selects the counter to c onfigure.
1 .0 0
E xpert
DFN C
Counter 1 Counter1 Select counter 1
C ounter mode c ounterMode
Selects the counter mode. The s elected Counter is
either Active or Disabled. When Disabled, the Counter
c an be c onfigured.
1 .0 0
E xpert
DFN C
Off Off The s elected Counter is Disabled
Active Active The s elected Counter is Enabled
C ounter Status c ounterStatus Returns the c urrent s tate of the c ounter.
1 .0 0
E xpert
DFN C
Counter Idle CounterIdle The counter is idle.
The counterStartSource feature is s et to off.
Counter Trigger Wait CounterTriggerWait The counter is waiting for a s tart trigger.
Counter Active CounterActive The counter is counting for the s pecified duration.
Counter Completed CounterCompleted The counter reached the CounterDuration count.
Counter Overflow CounterOverflow The counter reached its maximum possible count.
C ounter Start Source c ounterStartSource
Select the c ounter start s ource. Counter increments
from 0 to the value of the counterDuration feature.
1 .0 0
E xpert
DFN C
Off Off Counter is s topped.
Expos ure Start Expos ureStart Counter starts on the reception of the Exposure Start
event
Expos ure End Expos ureEnd Counter starts on the reception of the Exposure End
event.
Readout Start ReadoutStart Counter starts on the reception of the Readout Start
event.
Readout End ReadoutEnd Counter starts on the reception of the Readout End
event.
Frame Start FrameStart Counter starts on the reception of the Frame Start
event.
Valid Frame Trigger ValidFrameTrigger Counter starts on the reception of the Valid Frame
Trigger.
Rejected Frame Trigger InvalidFrameTrigger Counter starts on the reception of the Invalid Frame
Trigger.
CXP CXP Counter starts on the specified transitions on CXP
trigger.
Timer 1 End Timer1End Counter starts on the reception of the Timer 1 End
event.
Counter 1 End Counter1End Counter starts on the reception of the Counter 1 End
event.