Dalsa Genie Nano-CXP Series, User Manual

Page: 20 / 107

18
•
Nano-CXP Installation Genie Nano-CXP Series™
The Camera Works — Now What
Consult this manual for detailed Nano-CXP feature descriptions, as you write, debug and optimize
your imaging application. Consult the frame grabber manual for all board control features.
Nano-CXP Connectors and Status LED Overview
Connectors
The Nano-CXP has a connector for I/O and four CoaXPress data lane links:
•
A 10 pin I/O connector for camera power, plus trigger, strobe and general I/O signals. The
connector supports a retention latch, while alternately the Nano-CXP case supports using an I/O
cable with thumbscrews. Teledyne DALSA provides optional cables for purchase (see
Ruggedized Cable Accessories ). Also see 10-pin I/O Connector Details for pin out specifications.
• Four CoaXPress Link connectors are available for data output. Use a CoaXPress frame grabber
with the Nano-CXP. See Components Express Contact Information for a variety of CoaXPress
cables.
The following figure of the Genie Nano-CXP back shows connector and LED locations along with
identification labels. See Mechanical Specifications — Nano-CXP for details on the connectors and
camera mounting dimensions.
Genie Nano-CXP – Rear View