Dalsa Genie Nano-CXP Series, User Manual

Page: 12 / 107

10
•
Nano-CXP Specifications Genie Nano-CXP Series™
Operating Temperature
(at camera front plate) All Models: -20°C to +65°C (-4°F to +149°F) Any metallic camera mounting provides
heat-sinking therefor reducing the internal temperature.
Operating Relative Humidity 10% to 80% non-condensing
Storage -40°C to +80°C (-4°F to +176°F) temperature at 20% to 80% non-condensing
relative humidity
Conformity CoaXPress (JIIA), EU and REACH
Sensor Cosmetic Specifications
After Factory Calibration and/or Corrections are applied (if applicable — dependent on sensor)
Blem ish Specifications Maxim um Num ber of
Defects
Blem ish Description
Hot/Dead Pixel defects Typical 0.0025%
Max 0.005%
Any pixel that deviates by ±20% from the average of
neighboring pixels at 50% saturation including pixel stuck at 0
and maximum saturated value.
Spot defects none Grouping of more than 8 pixel defects within a sub-area of 3x3
pixels, to a maximum spot size of 7x7 pixels.
Clusters defects none Grouping of more than 5 single pixel defects in a 3x3 kernel.
Column defects none Vertical grouping of more than 10 contiguous pixel defects
along a single column.
Row defects none Horizontal grouping of more than 10 contiguous pixel defects
along a single row.
•
Test conditions
•
Nominal light = illumination at 50% of saturation
•
Temperature of camera is 45°C
•
At exposures lower than 0.25 seconds
•
At nominal sensor gain (1x)