Dalsa Genie Nano-CXP Series, User Manual

Page: 81 / 107

Genie Nano-CXP Series™ Technical Specifications
•
79
Connectors
•
CoaXPress: DIN 1.0/2.3 connector (CXP-6 maximum speed rating)
10-pin I/O Connector Details
•
An auxiliary DC power source can be connected to the 10-pin connector (SAMTEC TFM-105-02-
L-D-WT) when not using Power over CoaXPress (PoCXP). Nano supports connecting cables with
retention latches or screw locks. The following figure shows the pin number assignment.
• Note: Connect power via the I/O connector or PoCXP, but never both. Although Nano has
protection, differences in ground levels may cause operational issues or electrical faults.
Teledyne DALSA makes available optional I/O cables as described in Ruggedized Cable Accessories .
Contact Sales for availability and pricing.
Pin Num ber Genie Nano Direction Definition
1 PWR-GND — Camera Power Ground (common with chassis pin10)
2 PWR-VCC — Camera Power – DC +12 to +26 Volts
3 - 9 N/A — Reserved
10 Chassis — Camera Chassis
(connected to CXP connector shell & pin-1)