manualshive.com logo in svg

DAKOTA ULTRASONICS MiniMax v2.0, Operation Manual

Share
Download
DAKOTA ULTRASONICS MiniMax v2.0 Operation Manual Download Page 61

MiniMax

 Bolt Tension Monitor 

55 

 

1)  Press the 

 key multiple times to tab right and the 

 key multiple times 

to tab left until the 

CAL 

menu is highlighted and displaying the submenu 

items. 

2)  Press the 

 

and

 

 arrow keys multiple times to scroll through the sub 

menu items until 

ZERO MODE

 is highlighted. 

3)  Press the 

 

and

 

 arrow keys multiple times to scroll the zero mode 

options until the 

AUTO

 option is displayed. 

Note:

  

The auto option will perform a two-point zero calibration using the first 

and second multiple of the calibration standard.  Therefore, if a 3” bar is used, 

the second point will be at 6”.

 

 

 

4)  Press the 

 

and

 

 arrow keys multiple times to scroll through the sub 

menu items until 

MEASURE ZERO 

is highlighted. 

Summary of Contents for MiniMax v2.0






































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands