manualshive.com logo in svg

DAKOTA ULTRASONICS MiniMax v2.0, Operation Manual

Share
Download
DAKOTA ULTRASONICS MiniMax v2.0 Operation Manual Download Page 159

MiniMax

 Bolt Tension Monitor 

153 

 

1)  Press the 

 key once to activate the menu items tab.  Press the 

 key 

multiple times to tab right and the 

 key multiple times to tab left until the 

TUNE 

menu is highlighted and displaying the submenu items. 

2)  Use the  

 and 

 arrow keys multiple times to scroll through the sub 

menu items until 

PULSE

 is highlighted.

 

3)  Use the

 

 and 

 

arrow keys multiple times to scroll the 

Pulse

 options.

 

4)  Once the 

Pulse

 is displayed, press the 

 key to return to the 

measurement screen.

 

 

13.6 Pulser Voltage 

The 

MiniMax

 has a 200 volt square wave pulser that can be adjusted for specific bolt 

lengths, geometries, materials, transducer size and frequencies.  The Pulser Voltage 
feature offers various voltage settings of 100, 150 & 200 volts.  Lower voltage 
selections are best for short small diameter bolts, while higher voltage are best for 
longer bolts with attenuative or inconsistent materials.  The procedure to change the 
pulser voltage is outlined below: 

  

Changing the Pulser Voltage 

Summary of Contents for MiniMax v2.0






































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands