manualshive.com logo in svg

DAKOTA ULTRASONICS MiniMax v2.0, Operation Manual

Share
Download
DAKOTA ULTRASONICS MiniMax v2.0 Operation Manual Download Page 55

MiniMax

 Bolt Tension Monitor 

49 

7)  Press the 

 key to save the 

Group Note

 and return to the 

Group List 

Items 

menu, 

 or  to cancel entering the 

Group Note

. 

 

Selecting the Number of Bolts in the Group 

Note:

  

A group can contain up to 250 bolts.  In this case, the number of bolts in 

the group can be thought of as the number of reference points on the calibration 

standards.  If a standalone bolt is used, the group will contain 1 bolt.  If the 3” & 

6” cal bars are being used, then the group should contain 2 bolts.  If the triple 

sided glass block is being used, then the group should contain 3 bolts.

 

 

1)  Press the 

 

and

 

 arrow keys multiple times to scroll through the new 

Group List Items

 until 

NUM BOLTS

 is highlighted. 

2)  Press the 

 key to display the 

Digits Edit Box

. 

3)  Press the 

 

and

 

 arrow keys multiple times to scroll the highlighted 

value. 

4)  Press the 

 

and

 

 arrow keys multiple times to scroll the digit 

locations. 

5)  Repeat steps 

3 & 4

 until the 

NUM BOLTS

 value is correctly displayed. 

Summary of Contents for MiniMax v2.0






































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands