manualshive.com logo in svg

DAKOTA ULTRASONICS MiniMax v2.0, Operation Manual

Share
Download
DAKOTA ULTRASONICS MiniMax v2.0 Operation Manual Download Page 156

Dakota Ultrasonics 

150 

 

1)  Press the 

 key once to activate the menu items tab.  Press the 

 key 

multiple times to tab right and the 

 key multiple times to tab left until the 

DISP 

menu is highlighted and displaying the submenu items. 

2)  Press the 

 and 

 arrow keys multiple times to scroll through the sub 

menu items until 

BACKLIGHT

 is highlighted. 

3)  Press the

 

 and 

 

arrow keys multiple times to scroll the 

BACKLIGHT

 

options. 

4)  Finally, press the 

 key to return to the measurement screen and begin 

taking readings. 

 

13.4 Graphics Options (look & feel) 

The 

MiniMax

 has a few graphical ‘look and feel’ options to accommodate user 

preference.  These features only serve as cosmetic items and do not change the 
functionality of the 

MiniMax

 in any way. 

 

RECT Wave: 

 
The rectified wave feature is only functional when using 

RECT

 wave view, and 

provides the user the following display options: 
 

Outline

 – Draws the unfilled outline of the waveform. 

Summary of Contents for MiniMax v2.0






































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands