8
CHAPTER THREE
QUICK START GUIDE
3.1 Overview
This section demonstrates the basic procedures for setting up and measuring bolts
using the
MiniMax
. More in depth explanations pertaining to the individual functions
and features can be found in the chapters that follow.
Here we go!
3.2 Getting the
MiniMax
ready
Making all the connections
In order to get the
MiniMax
ready for operation; the following connections must
be made:
1) Remove the
MiniMax
from the carrying case.
2) Connect the transducer cable to the transducer and plug it into the
MiniMax
.
3) If a temperature sensor is being used, connect the sensor to the
MiniMax
.
3.3 Setting up the
MiniMax
Please Read:
In this section the
MiniMax
will be setup in its simplest form.
Remember this is only a quick start guide to get the user up and measuring bolts.
Before we setup the gauge to measure basic elongation, the following assumptions
must be made: A preset material type will be used. The user will not be re-measuring
the fasteners at a later date to monitor relaxation of the joint over time. This
eliminates the need for an instrument zero/calibration. All these assumptions will be
answered and explained in detail in the chapters that follow.
Selecting Default Setup
Summary of Contents for MiniMax v2.0
Page 2: ......
Page 49: ...MiniMax Bolt Tension Monitor 43 Figure 6 Reflection in a bending bolt...
Page 196: ......
