manualshive.com logo in svg

DAKOTA ULTRASONICS MiniMax v2.0, Operation Manual

Share
Download
DAKOTA ULTRASONICS MiniMax v2.0 Operation Manual Download Page 40

Dakota Ultrasonics 

34 

4.12 XFER (transfer) – Menu       

  

 

UPGRADE GAUGE:

  Enables the user the ability to upgrade the 

MiniMax

 to the 

most current firmware revision.  Refer to page 162 for further info.

 

CAPTURE TO FILE:

  Enables the user the ability to enable screen capture to .tiff 

files.  Refer to page 163 for further info. 

ABOUT:

   Provides the user with Dakota Ultrasonics contact information and the 

MiniMax

 software version.  Refer the Dakota Ultrasonics web site for information on 

the latest firmware versions available for download. 
 

4.13 CLR (clear) Key      

 

The primary functions of the 

CLR

 key, are to clear a measurement from a grid or 

sequential log files cell location or set an obstruct, backspace in an 

Alpha Edit Box

.  

If a user has already saved a measurement and B-Scan to a cell location, use this 
key to clear the measurement at any time. 
 

4.14 MEAS (measurement mode) Key      

 

The 

MEAS

 key puts the 

MiniMax

 into its primary mode of operation.  In this mode, 

the user has a complete view of the waveform, hot menu items, and measurement. 
 

4.15 OK Key      

 

The primary function of the 

OK

 key is confirmation of a change or selection.  The 

OK

 

key also toggles between full or split screen view while in the main measurement 
screen.  If the 

MiniMax

 is displaying a data group, the 

OK

 key toggles an advance to 

row number option. 
 

Summary of Contents for MiniMax v2.0






































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands