manualshive.com logo in svg

DAKOTA ULTRASONICS MiniMax v2.0, Operation Manual

Share
Download
DAKOTA ULTRASONICS MiniMax v2.0 Operation Manual Download Page 39

MiniMax

 Bolt Tension Monitor 

33 

CLOSE:

  Provides the user the ability to close a currently opened grid or sequential 

log file.  Refer to page 177 for further info. 

DELETE ONE FILE:

  This function provides the user with the ability to delete one 

individual grid or sequential log file from a list of multiple grids/files previously saved 
in memory.  Refer to page 170 for further info. 

DELETE ALL DATA: 

 This function provides the user with the ability to delete all files 

currently stored in memory.  Refer to page 172 for further info. 

SUMMARY: 

 Provides the user with an overall summary of the current data group 

open/active.  Refer to page 172 for further info. 
 

4.11 UTIL (utilities) – Menu       

  

 

 

TEMP MODE:

 This sub menu item enables the user to select the automatic 

temperature compensation mode (manual, semi-auto, and auto).  This feature is only 
available to those units purchased with the automatic temperature compensation 
option and probe.  

Note:

 

Contact Dakota for information on upgrading the MiniMax.

  

Refer to page 91 for further info. 

ALARM:

  Toggles alarm mode on, off, or audible.  Refer to page 157 for further info. 

ALARM LOW:

  Gives the user the ability to set the LO limit parameter.  If the 

measurement falls below this value, a red light will illuminate and sound the internal 
beeper.  Refer to page 157 for further info.

 

ALARM HIGH:

  Gives the user the ability to set the HI limit parameter.  If the 

measurement exceeds this value, a red light will illuminate and sound the internal 
beeper.  Refer to page 157 for further info.

 

KEY CLICK:

  Gives the user the ability to set the level of the key press beeper OFF, 

QUIET, or LOUD.  Refer to page 160 for further info.

 

SET DATE:

  Gives the user the ability to set the internal date and time stamp in the 

MiniMax

.  Refer to page 160 for further info.

 

SHOW DATE:

  Gives the user the ability display the time, date or both in the main 

measurement screen.  Refer to page 160 for further info. 
 

Summary of Contents for MiniMax v2.0






































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands