manualshive.com logo in svg

DAKOTA ULTRASONICS MiniMax v2.0, Operation Manual

Share
Download
DAKOTA ULTRASONICS MiniMax v2.0 Operation Manual Download Page 179

MiniMax

 Bolt Tension Monitor 

173 

14.6 Editing a Group (File) 

Once a grid has been created and saved to memory, the user can edit the 

Name

, 

Comments

, or 

Increment Direction

 at a later time. The following procedures outline 

this process:  
 

Editing a Grid 

 

1)  Press the 

 key once to activate the menu items tab.  Press the 

 key 

multiple times to tab right and the 

 key multiple times to tab left until the 

DATA 

menu is highlighted and displaying the submenu items. 

2)  Use the 

 and 

 arrow keys to scroll through the sub menu items until 

EDIT

 is highlighted. 

3)   Press the 

 key to display the 

Edit List Box

. 

4)  Use the 

 and 

 arrow keys to scroll through the 

Edit

 options until 

NAME

, 

NOTE 

or

 INCR. DIR

 is highlighted. 

Note:

  If editing the INCR. DIR, simply press the 

 and 

 arrow keys to 

scroll NONE, NORTH, EAST, SOUTH, WEST for a Grid, or INC, DEC for a Seq 

Log.  Proceed to step 10.

 

Summary of Contents for MiniMax v2.0






































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands