DAITEM ALARM SYSTEM AND DIALLER, User Manual, Page: 9 / 40

9
3. Configuring the system locally using the keypad built into the control panel
If 5 wrong access codes are entered on the keypad in less than 5 minutes this will block the keypad for 5 minutes and the
control panel will be informed.
You can replace the original language with another language.
To modify the language, enter:
Factory setting: English
Your installer will have already configured your control panel but you can modify some of the programming at any time.
3.1 Modifying the language
0: French
1: Italian
2: German 3: Spanish
4: Dutch
5: English
“bip + chosen
language”
master code
IMPORTANT
• To keep your codes confidential, we recommend you change the keypad access codes often and regularly clean the keys.
• To prevent unwanted calls to correspondents, do not end the master code with a “0”.
The events memorised by the control panel are date and time stamped.
To programme the date and time manually , proceed as follows:
3.2 Modifying the date and time
Do not lose your codes as you will need them in order to programme new codes. However, if you do lose your codes,
contact your installer who will put the system back into its factory configuration and programme the codes again. Your
master code allows you to configure the control panel and access all the system commands using the built-in keypad.
3.3 Modifying your master code
• Date
To modify the date, enter:
“bip + date
announced”
• Time
To modify the time, enter:
“bip + time
announced”
Day Month
Hour Minutes
Year
(e.g. for 2012,
enter 12)
master code
master code
To modify the master code, enter:
Factory master code: 0000
Example:
To replace the factory master code “0000” with the new code “1423”, enter:
... ... ...
“beep”
old
master code
new
master code
new master
code repeated
IMPORTANT: all access codes must differ from each other.