DAITEM ALARM SYSTEM AND DIALLER, User Manual, Page: 15 / 40

15
* Requires the installation of a dialler unit in the control panel or the installation of a separate dialler.
• The control panel permanently monitors the state of
devices:
- power supply,
- tamper system,
- telephone line availability*,
- radio link.
• The control panel indicates faults:
- on receipt of an Off or Arm order,
- when the system status is queried or consulted remotely.
8. The control panel indicates faults
Control panel voice message Events
“bip, Fault, Voltage, Control_panel” Control panel battery low
“bip, Fault, Voltage, Detector n°” Detector battery low
Device power supply faults
“bip, Fault, Voltage, Battery, Control panel” The control panel does not have a Li-Ion back-up battery
“bip, Fault, Voltage, Siren n°” Siren battery low
“bip, Fault, Voltage, Relay n°” Radio relay battery low
“bip, Fault, Voltage, Remote Control Unit n°” Keypad or keyfob Low battery power
Control panel voice message Events
“bip, Fault, Tamper, Control panel” Control panel tamper fault
“bip, Fault, Tamper, Detector n°, Group n°” Detector tamper fault
Device tamper faults
“bip, Fault, Tamper, Siren n° or Tamper, Relay n°” Siren or radio repeater relay tamper fault
“bip, Fault, Tamper, Remote Control Unit n°” Keypad tamper fault
Control panel voice message Events
Device radio link faults
“bip, Fault, Radio_link, Detector n°, Group n°” Loss of radio link between a detector and the control panel
“bip, Fault, Radio_link, Siren n° or Tamper, Relay n°” Loss of radio link with a siren or radio repeater relay
“bip, Fault, Radio_link, Remote Control Unit n°” Loss of radio link between a keypad and the control panel