DAITEM ALARM SYSTEM AND DIALLER, User Manual, Page: 10 / 40

10
4. Restricting access to commands
The user codes can have separate and limited access to:
• specific keypad control keys,
• specific groups.
Only the command keys or groups selected during programming can be accessed when the user code is entered.
To restrict a user code to (a) specific command key(s) , use the keypad to enter:
To restrict a user code to (a) specific group(s) , use the keypad to enter:
...
...
4.1 Restricting access to user codes
master code
user code 01 to 32
(chosen user
number)
user code
command
keys
master code
user code 01 to 32
(chosen user
number)
user code
group(s)
1 to 8
The user codes limit access to certain commands. They are meant for occasional users.
Using the keypad, enter:
3.4 Modifying the user codes
IMPORTANT: a programmed user code is automatically enabled.
master code
new user code 01 to 32
(chosen user
number)
new user code
repeated
The following procedure can be followed to enable or disable user codes without modifying their programming.
Using the keypad, enter:
3.5 Disabling or enabling the user codes
master code
0: disabled
1: enabled 01 to 32
(chosen user
number)
Example , after entering the master code (1234), to restrict user code 1 (1213) to Group 1 and Group 2 , enter:
In this case, user code 1 can only disarm and arm Group 1 and Group 2.
Example , arming groups 1 and 2:
WARNING: the 32 user codes are only available with control panel keypad versions 2.1.0 or later.
Enter
to check the version.
user code
master code