DAITEM ALARM SYSTEM AND DIALLER, User Manual, Page: 33 / 40

33
• If you are not supposed to acknowledge and terminate the dialler’s call cycle, hang up.
• if you are supposed to acknowledge and terminate the dialler’s call cycle, press 0 on the your telephone handset and you will
hear a long confirmation beep.
6. Instructions sheet
(to be filled in and given to your correspondents)
• - The correspondent can acknowledge and terminate the dialler call cycle:
❑
yes
❑
no
When you pick up the phone you will hear:
➜
a voice message repeated several times specifying the event having triggered the call,
➜ a request to acknowledge the dialler: “Press 0 to acknowledge” .
• The correspondent can listen in to what is happening on the protected premises:
❑
yes
❑
no
Correspondents whose number has been programmed with the listen-in option can listen in to what is happening on the
protected premises for 60 seconds (once the message has been delivered). This period can be repeated 4 times by
pressing on the telephone handset # key.
PSTN
GSM
/GPR
S
• General information about the caller:
Name: __________________________________________________________________ Tel.: _________________________________
Address:_______________________________________________________________________________________________________
Identification n°: _________________________________________________________________
Welcome message (if a message has been recorded this replaces the identification number): ___________________________
______________________________________________________________________________________________________________
✂
• Instructions:
Make a note of the instructions to be followed if the dialler calls.
------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------
(1) Function only available with GSM media
Command description Command n°
Disarm command relay 1 11
relay 2 12
relay 3 13
relay 4 14
Arm command relay 1 21
relay 2 22
relay 3 23
relay 4 24
Stop siren 30
Activate siren 31
Repeat listen-in period for 60 s (5 times max.) #
Stop listen-in and hang up dialler ⁄
Allow speak-out/talk-back 7
Allow listen-in 8
Allow speak-out/talk-back and listen-in (1) 9
for comfort type
applications using
the Daitem receiver
(lighting, etc.)