DAITEM ALARM SYSTEM AND DIALLER, User Manual, Page: 12 / 40

12
IMPORTANT: once a year or before going away for a long period, we advise you to test your security system. The TEST MODE
allows you to test each device in the system without triggering the sirens.
IMPORTANT: before moving in front of an infrared detector,
wait for 90 seconds in an unprotected area.
5. Testing the devices
4. Switch the control panel to user mode
3. Test each remote control unit
• Press the Off key on each remote
control unit.
or
• Enter your master code and press
the Off key on each keypad.
1. Switch the control panel to test mode
• Open then close all exits protected
by a door/window or multicontact
detector.
• Check the message issued by the
control panel.
2. Test each detector
• Move in front of each motion detector.
• Check the message issued by the control panel.
master code
“bip, Test_mode”
“bip, intrusion,
detector n°”
“bip, intrusion,
detector n°”
“bip, Off, Remote
Control Unit n°”
“bip, Off”
master code
TEST MODE
or
) ) ) ) )
) ) ) ) )
) ) ) ) )
) ) ) ) )