DAITEM ALARM SYSTEM AND DIALLER, User Manual, Page: 11 / 40

11
The tags can have separate and limited access to specific command keys and specific groups. Only the command keys or
groups selected during programming can be accessed using the tag.
To restrict a tag to (a) specific command key(s) , use the keypad to enter:
To restrict a tag to (a) specific group(s) , use the keypad to enter:
...
...
4.2 Restricting access using the tags
master code
tag n°
from 01 to 32
tag n°
from 01 to 32
command
key(s)
master code
tag n°
from 01 to 32
tag n°
from 01 to 32
group(s)
1 to 8
• To cancel a tag’s restricted access, use the keypad to enter:
Example: to cancel the restrictions linked to tag 02 , use the keypad to enter:
master code tag n°
from 01 to 32
tag n°
from 01 to 32
The access restrictions linked
to tag 02 will be cancelled.
• To restrict access to a command key and a group, use the keypad to enter:
Example: to restrict tag 01 to Armed/Off Group 1 and Armed Partial 1 commands, use the keypad to enter:
group(s)
1 to 8
“Armed Partial 1”
command key
Only the commands for Off
and Armed Group 1 and Armed
Partial One are accessible
using tag 01.
master code tag n°
from 01 to 32
tag n°
from 01 to 32
A registered tag is automatically enabled.
To disable or enable a tag, use the keypad to enter:
Examples:
• to
disable tag 01 , enter:
• to enable tag 02 , enter:
4.3 Disabling or enabling a tag
0: disabled
1: enabled
master code tag n°
from 01 to 32
WARNING: the 32 tags are only available with control panel keypad versions 2.1.0 or later.
Enter
to check the version.
master code
WARNING: the 32 tags are only available with control panel keypad versions 2.1.0 or later.
Enter
to check the version.
master code