DAITEM ALARM SYSTEM AND DIALLER, User Manual, Page: 21 / 40

21
2. Configuring a dialler locally using the built-in keypad
If 5 wrong access codes are entered on the keypad in less than 5 minutes this will block the keypad for 5 minutes and the
control panel will be informed.
IMPORTANT
• To keep your codes confidential, we recommend you change the keypad access codes often and regularly clean the keys.
• To prevent unwanted calls to correspondents, do not end the master code with a “0”.
You can replace the original language with another language.
To modify the language, enter:
Factory setting: French
Your installer will have already configured your dialler but you can modify some of the programming at any time.
2.1 Modifying the language
The events memorised by the dialler are date and time stamped.
To programme the date and time manually , proceed as follows:
2.2 Modifying the date and time
Do not lose your codes as you will need them in order to programme new codes. However, if you do lose your codes,
contact your installer who will put the system back into its factory configuration and programme the codes again. Your
master code allows you to configure the dialler and access all the system commands using the built-in keypad. Your master
code can also be used to access your device remotely (using a telephone or a computer connected to the dialler via the
secure Internet Portal):
2.3 Modifying your master code
0: French
1: Italian
2: German 3: Spanish
4: Dutch
5: English
“bip + chosen
language”
DIALLER
master code
• Date
To consult the date, enter:
To modify the date, enter:
“bip + date
announced”
• Time
To consult the time, enter:
To modify the time, enter:
“bip + time
announced”
Day
(1 to 31)
Month
(1 to 12)
Hour
(0 to 24)
Minutes
(0 to 59)
Year
(e.g. for 2012,
enter 12)
DIALLER
DIALLER
master code
master code
master code
master code
To modify the master code, enter:
Factory master code: 0000
Example:
To replace the factory master code “0000” with the new code “1423”, enter:
... ... ...
“beep”
old master
code
new master
code
new master
code
IMPORTANT: access codes must all be different.
DIALLER