![background image](http://html1.mh-extra.com/html/daikin/reyq96mtju/reyq96mtju_design-installation-and-testing-instruction_4175824035.webp)
Si39-406
Installation
General Information
29
Not
recommendable
but in case of
emergency
You must use a torque wrench but if you are obliged to install the unit without a torque wrench, you
may follow the installation method mentioned below.
After the work is finished, make sure to check that is no gas leak.
When you keep on tightening the flare nut with a spanner, there is a point where the tightening
torque suddenly increases. From that position, further tighten the flare nut the angle shown below:
Pipe size in. (mm)
Further tightening angle
Recommended arm length of tool
φ
1/4" (6.4)
60 to 90 degrees
Approx. 6" (150mm)
φ
3/8" (9.5)
60 to 90 degrees
Approx. 8" (200mm)
φ
1/2" (12.7)
30 to 60 degrees
Approx. 10" (250mm)
φ
5/8" (15.9)
30 to 60 degrees
Approx. 12" (300mm)
Summary of Contents for REYQ96MTJU
