Instructions
SiBE01-503
34
System Configuration
2.3
Preparation before Operation
7
Preparation Before Operation
To set the batteries
1. Pull the tabs on top down and open
the lid.
2. Set two dry batteries (AAA).
3. Insert the two tabs in the bottom of
the lid and close the lid as it was
before.
ATTENTION
About batteries
• When replacing the batteries, use batteries of the same type, and replace the two old batteries
together.
• When the system is not used for a long time, take the batteries out.
• We recommend replacing once a year, although if the remote controller display begins to fade or if
reception deteriorates, please replace with new alkali batteries. Do not use manganese batteries.
• The attached batteries are provided for the initial use of the system.
The usable period of the batteries may be short depending on the manufactured date of the air
conditioner.
1
2
3
Lower tabs
(2 places)
Top tab
Summary of Contents for ARY20DV2
