![background image](http://html.mh-extra.com/html/daikin/ary20dv2/ary20dv2_service-manual_501356058.webp)
SiBE01-503
Instructions
System Configuration
49
3P147100-1D
22
FAULT DIAGNOSIS BY REMOTE CONTROLLER
In the ARC445A series, the temperature display sections on the main unit indicate corresponding codes.
1. When the TIMER CANCEL button is held down for 5 seconds, a “
” indication flashes on the
temperature display section.
2. Press the TIMER CANCEL button repeatedly until a continuous beep is produced.
• The code indication changes as shown below, and notifies with a long beep.
NOTE
Fault diagnosis.
CODE
MEANING
SYSTEM
00
NORMAL
INDOOR UNIT
A1
INDOOR PCB DEFECTIVENESS
A5
HIGH PRESSURE CONTROL OR FREEZE-UP PROTECTOR
A6
FAN MOTOR FAULT
C4
FAULTY HEAT EXCHANGER TEMPERATURE SENSOR
C9
FAULTY SUCTION AIR TEMPERATURE SENSOR
OUTDOOR
UNIT
F6
HIGH PRESSURE CONTROL (IN COOLING)
J6
FAULTY HEAT EXCHANGER TEMPERATURE SENSOR
1. A short beep and two consecutive beeps indicate non-corresponding codes.
2. To cancel the code display, hold the TIMER CANCEL button down for 5 seconds. The code display also
cancel itself if the button is not pressed for 1 minute.
TIMER CANCEL button
It cancels the timer setting.
Summary of Contents for ARY20DV2
