Depending on your configuration,
the following parts may be included:
• Power Supply
• Optional Oxidizing Unit
• Germicidal Twin H Lamp (packed in lamp box)
• Twelve (12) Sheet Metal Screws
When installing and using this electrical equipment, basic safety precautions
should always be followed including the following:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. Minimum living space for this product is 1,200 square feet.
3.
Always be sure the unit is unplugged during installation or service procedures.
4.
The ultraviolet light produced by the UV lamp is harmful to your eyes. Do not look directly at
the lamp. Should it become necessary to view the lamp, use UV-protected sunglasses.
Lors de l’installation et de l’utilisation de cet équipement, des précautions devront être suivies.
1- Lire et suivre les étapes attentivement.
2- Espace minimum d’une habitation pour ce produit est de 1,200 pi. carrés
3- Assurez vous de toujours débrancher avant l installation ou le service.
4
-
Ne pas regarder la lampe directement avec les yeux. Si nécessaire de le faire,
veuillez porter les lunettes de soleil contre les rayons U.V.
IMPORTANT: SAFETY INSTRUCTIONS
Important: Instructions de securité
3099107
• Four (4) caution labels
• Strain relief connector
• Alcohol pad for cleaning lamps
• Installation & maintenance instructions
MUV7-50DR
MultiVoltage Oxidizing UVC System
Installation & Maintenance Instructions
UNPACKING THE UNIT
The optional oxidizing unit is shipped with the 5” lamp installed.
The germicidal lamp is placed in a box with protective packaging.
When handling lamps take care to not touch the glass portion of the
lamp with bare hands. Oils from the hands can cause “hot spots”
which reduce lamp life. Handle by the end caps or use a soft cloth.
If you accidentally touch a lamp, clean it using the included alcohol
cleaning pad or a soft cloth dampened with rubbing alcohol. The
lamp is fragile and proper care must be taken when removing from
packaging.
