TROUBLESHOOTING
With the selector switch in the ON position, the LED should light when power is supplied to the unit.
If the LED does not light with switch in the On position:
1. Check to be sure there is power to the unit.
2. Be sure lamp connectors are fastened securely.
3. If the LED still does not light, replace lamp(s).
4. If still not operating, replace ballast.
WARRANTY
All electronic components carry a lifetime warranty to the original homeowner. In addition there is a four year
warranty from the date of installation for any subsequent owner. The manufacturer reserves the right to send
replacement parts or to replace the unit at its discretion. This warranty does not cover any labor or damage
resulting from improper installation or abuse. Use of any lamp other than a genuine PremierOne lamp designed
for this device will void the warranty.
The original lamps are warranted for a period of two years. This warranty does not cover lamps broken during
shipping, installation or as a result of improper handling.
All returns are routed through your contractor/wholesaler and must be approved and accompanied by an RGA#.
The limited warranties described above are in lieu of any other warranty, whether expressed or implied, written
or oral (including any warranty of merchantability or fitness for a particular purpose.) This warranty gives you
specific legal rights. You may also have other rights which vary from state to state.
For Technical Support Call (800)982-1840 www.premieroneproducts.com ©2016
LSK07403H-16/5
UVC16HCP-RF
LAMP KITS FOR MUV7-50DR
#LSK07403H-16/5
44-Watt UVC/UVV lamp service kit with 16” UV lamp.
#LSK07403H-12/5
36-Watt UVC/UVV lamp service kit with 12” UV lamp.
LAMP KITS FOR MUV7-50PS
#LSK07401H-16
36-Watt UVC lamp service kit with 16” UV lamp.
#LSK07401H-12
24-Watt UVC lamp service kit with 12” UV lamp.
#UVV5CL
8-Watt UVV lamp service kit with 5” oxidizing lamp.
#UVC16HCP-RF
36-Watt 16” UV lamp with built in reflector.
#UVC12HCP-RF
24-Watt 12” UV lamp with built in reflector.