Dahua DH-PFR5QI-E60 User Manual Download Page 94

Page: 94 / 113

User’s Manual

●

Duration

: After setting white light duration, the white light is turned off after an extended time

of period after an alarm. It is 5 seconds–30 seconds.

5.1.1.8

Audio Linkage

The system broadcasts alarm audio file when an alarm event occurs. Select

Setting > Radar

Settings > Region

to set alarm audio file.

Audio linkage

5.1.2

Subscribing Alarm

5.1.2.1

About Alarm Types

For alarm types and preparations of alarm events, see Table 5-2.

Table 5-2

Description of alarm types

Alarm Type

Description

Preparation

Disk Full

The alarm is triggered when
the free space of SD card is
less than the configured value.

The SD card no space function
is enabled. For details, see
"5.3.1 SD Card Abnormality".

Disk Error

The alarm is triggered when
there is failure or malfunction
in the SD card.

SD card failure detection is
enabled. For details, see "5.3.1
SD Card Abnormality".

External Alarm

The alarm is triggered when
there is external alarm input.

The device has alarm input port
and external alarm function is
enabled.

Illegal Access

The  alarm  is  triggered  when
the  number  of  consecutive
login  password  error  is  up  to
the allowable number.

Illegal access detection is
enabled. For details, see "5.3.3
Configuring Illegal Access.

Audio Detection

The alarm is triggered when
there is audio connection
problem.

Abnormal audio detection is
enabled.

IVS

The alarm is triggered when
intelligent rule is triggered.

Enable IVS, crowd map, face
detection or people counting,
and other intelligent functions.

Summary of Contents for DH-PFR5QI-E60


















































































































Search results

Summary of Contents for DH-PFR5QI-E60

Reviews:

Related manuals for DH-PFR5QI-E60

Brands by name

Popular brands

Dahua DH-PFR5QI-E60, User Manual

Search results

Summary of Contents for DH-PFR5QI-E60

Reviews:

Related manuals for DH-PFR5QI-E60

Brands by name

Popular brands