User’s Manual
77
Table 4-3
IVS setup parameter description
Parameter
Description
Radar
Structuring
After enabling radar structuring, the live view will display information
including target distance, angle, speed, and type.
You need to enable Fusion before enable Radar Structuring.
Fusion
After enabling fusion, the live view will display the historic track of the
moving target within the detection range.
Trajectory
Duration
The displayed duration of target moving trajectory. The value ranges from
3 to 30 seconds, and the default value is 10 seconds.
Detection
Sensitivity
Configure the detection sensitivity of human and vehicle. The value
ranges from –5 to 5. The default value is 0.
The smaller the value is, the higher the detection accuracy for human is.
The bigger the value is, the higher the detection accuracy for vehicle is.
OSD
After being enabled, the live view will display a sector according to the
selected map location. The sector is a virtual area that displays the track
point within the detection range. The radius of the sector is 60 m, and the
angle is 120°.
Map Location
8 options. Corresponds to the live view location.
Click
Save
.
Configuring Device Attitude
Device attitude is enabled by default. After installation, if you need to adjust the device
orientation, configure device attitude to see if the device is installed correctly.
The embedded chip monitors the device attitude in real time. Parameters include pitch angle,
roll angle and yaw angle (always 0°).
Procedures
Select
Setting > Radar Settings > Device Attitude
.
Device attitude
When adjusting the radar orientation, it is recommended to set the pitch angle to
around –3°, and roll angle 0°.
Click
Save
.
