Dahua DH-PFR5QI-E60 User Manual Download Page 34

Page: 34 / 113

User’s Manual

3.3.2.3.4

Configuring Text Overlay

You can enable this function if you need to display additional information such as geographical
location in the video image.

Text overlay and OSD overlay (

Setting > Radar Settings > IVS Setup

) cannot be enabled at

the same time.

Select

Setting > Video > Overlay > Text Overlay

Select

Enable

, and enter text and select text align.

Click + to add additional text overlay. Maximum 9 lines are supported.

Move the text overlay box to the position that you want in the image.

Text Overlay

Click

Save

3.3.2.3.5

Configuring Font Attribute

You can enable this function if you need to adjust the font size in the video image.

Select

Setting > Camera > Video > Overlay > Font Attribute

Select the font color and size.

Summary of Contents for DH-PFR5QI-E60


















































































































Search results

Summary of Contents for DH-PFR5QI-E60

Reviews:

Related manuals for DH-PFR5QI-E60

Brands by name

Popular brands

Dahua DH-PFR5QI-E60, User Manual

Search results

Summary of Contents for DH-PFR5QI-E60

Reviews:

Related manuals for DH-PFR5QI-E60

Brands by name

Popular brands