User’s Manual
38
The configuration of
Max Connection
takes effect immediately, and others will take
effect after reboot.
3.4.3
PPPoE
Point-to-Point Protocol over Ethernet, it is one of the protocols that device uses to connect to
the internet. Get the PPPoE username and password from the internet service provider, and
then set up network connection through PPPoE, the camera will acquire a WAN dynamic IP
address.
Prerequisites
● The camera has connected to the network.
● You have gotten the account and password from Internet Service Provider.
Procedure
Step 1 Select
Setting
> Network > PPPoE
.
PPPoE
Step 2 Select the
Enable
check box, and then enter user name and password.
● Disable UPnP while using PPPoE to avoid possible influence.
● After making PPPoE connection, the device IP address cannot be modified through
web interface
Step 3 Click
Save
.
The success prompt box is displayed, and then the real-time WAN IP address is
displayed. You can visit camera through the IP address.