User’s Manual
74
Add IP/MAC
Step 3 Configure parameters.
Table 3-36
Description of adding IP/MAC parameters
Parameter
Description
Rule Type
Select IP address, IP segment, MAC address or all IP addresses.
● IP address: Select IP version and enter the IP address of the host
to be added.
● IP segment: Select IP version and enter the start address and
end address of the segment to be added.
● MAC address: Enter MAC address of the host to be added.
● All IP addresses: Set all IP addresses in trusted list or restricted
list.
Device All Ports
Set access ports. You can select all ports or the ports in defined
areas.
● Device all ports: Set all IP port in trust list or Banned list. When
selecting
BannedList
in
Mode
, and
All IP Address
in
Rule
Type
, you cannot select the
Device All Ports
check box.
● Device start server port and Device end server port: Set Device
start server port and device end server port, and the range is 1–
65535.
Device Start Server
Port
Device End Server
Port
Step 4 Click
OK
, and the
Firewall
interface is displayed.
Step 5 Click
Save
.
