Daewoo Bus BS Series, Owner'S Manual, Page: 233 / 260

7-43
FAULTY DIAGNOSIS
Fault
Code
9.7
9.8
9.9
10.1
10.2
10.3
10.4
10.5
10.6
12.3
12.4
12.5
C
C
C
C
C
C
C
C
C
N
N
C
Lamp Conditions of occurring Contents of trouble
Ignition of #1 cylinder is not good
Ignition of #5 cylinder is not good
Ignition of #3 cylinder is not good
Ignition of #6 cylinder is not good
Ignition of #2 cylinder is not good
Ignition of #4 cylinder is not good
Ignition of several cylinder is not good
Injector is opened too long
Engine speed is abnormal
(Additional function)
Low Speed Torque Limit is abnormal
High Speed Torque Limit is abnormal
Working Lamp of Restoration Catalyzer is abnormal
Injector is abnormal, compression pressure is a drop,
camshaft / crankshaft speed sensor signal is abnormal
Operating time of injector is excessive from standard values
Error is occurred when calculate engine speed using
crankshaft / camshaft speed sensor
Low Speed Torque Limit Protecting Device is abnormal
High Speed Torque Limit Protecting Device is abnormal
Working Lamp of Restoration Catalyzer is abnormal
※ Check of the lamp ’ s operation
N : Case of no damage to the performance and the engine.
C : Case of requirement for the check after running (no emergency check).
B : Case of requirement for the check and measure after running at the low speed at the time of occurring.