Daewoo Bus BS Series, Owner'S Manual, Page: 111 / 260

a. Check if the air pressure is higher
than 8.0kgf/cm 2 . Check for any air-
pressure related warning indications.
b. Increase the rpm to increase the air
pressure if needed.
c. Release Parking Brake.
d. Check surrounding area and driving
direction. Especially watch out for
children and pedestrians.
e. Star the vehicle with the gearshift on
1st gear after warming up the
engine.
Driver is responsible for the safety of
the vehicle outside and the people in
and outside of the vehicle. Therefore,
driver must drive carefully. Most of the
accidents occur from driver s
carelessness.
Check for the turned on lamps
among the pilot lamp during driving.
All the not operative lamps must be
off during driving.
Keep engine revolution around the
maximum torque.
Accelerate the vehicle smoothly, and
in outrunning the vehicle in front,
check the environment and keep the
speed of the vehicle steady.
In shift the gear, optimal revolution of
the engine must be kept.
Do not set foot on the clutch pedal
except when shifting the gear.
In braking, keep distance between
the vehicles in front, Especially if the
vision is blur or the road conditions
are bad, slow down the vehicle and
keep distance.
4-2
1. DRIVING METHOD
START-UP & DRIVING
Setting Off Safe Driving
OM-B054
REFERENCE
When braking during driving, driver
must hold on to the stirring wheel
the gear on. If the speed reduces,
shift the gear to the lower gear and
step on the clutch pedal when the
vehicle comes to a full stop.
When braking in safe distance, use
both the engine brake and assistant
brake, and step on the main brake
several times before bring the
vehicle into a full stop.
Step on the brakes several times is
effect since the actual brake
distance gets longer because of the
riction of the tire causes the stirring
wheel to be useless. ABS brake
system does this itself to minimize
this process acting to help avoid
such dangers.
·
·
·
·
·
·
·
·
·