Wheelchair ramp standby
Check if the elevation shaft of the mid
door of the vehicle is properly shut.
Check if there are any obstructions
around before the ramp is activated.
Park the vehicle near the pavement so
that the ramp can be activated on the
borderline of the road.
Pull the parking brake to securely park
the vehicle.
Riding and getting off the wheelchair.
Open the mid-door entrance.
Set the ramp switch on
“
OUT
”
. The
ramp will extend to outside and
setting the switch on
“
IN
”
will retract
the ramp.
The alarm buzzes until the operation
is over while the ramp is operational.
Safely guide the passenger when the
ramp operation is completed.
Park the wheelchair on a safe spot
and and secure it with safety belt.
You must use safety belt for
passenger safety.
3-70
DEVICE CONTROL TIPS
Wheelchair Ramp (OPTION)
OM-S079E
OM-S080
WARNING
While the ramp is operating, it
should never be riden by
wheelchairs or be stood on.
Please get on the ramp when it is
fully extended.
·
·
·
·
·
·
·
·
Summary of Contents for BS Series
Page 1: ......
Page 13: ...DEALER IMPRINT...
Page 153: ...6 11 VEHICLE INSPECTION AND MAINTENANCE OM F115E TYPE B...
Page 260: ......