DAB E.SYBOX MINI 3, Instruction For Installation And Maintenance

Page: 40 / 681

ENGLISH
GB
37
6.1.2 “Anti-Cycling (Protection against continuous cycles without utility request) 60
6.1.3 “Anti-Freeze (Protection against freezing of water in the system) 61
6.1.4 “BP1” Blockage due to fault of the delivery pressure sensor 61
6.1.5 “BP2” Blockage due to fault of the suction pressure sensor 61
6.1.6 “PB” Blockage due to supply voltage outside specifications 61
6.1.7 “SC” Blockage due to short circuit between the motor phases 61
6.2 Manual reset of error conditions 61
6.3 Self-reset of error conditions 61
7. Reset and factory settings 62
7.1 General system reset 62
7.2 Factory settings 62
7.3 Restoring the factory settings 62
8. Particular installations 63
8.1 Inhibiting self-priming 63
8.2 Wall installation 64
9. Maintenance 64
9.1 Accessory tool 64
9.2 Emptying the system 64
9.3 Non-return valve 65
9.4 Motor shaft 66
9.5 Expansion Vessel 66
10. Troubleshooting 67
11.
Updating the firmware 68
12. Disposal 68
13. Guarantee 68