ENGLISH
37
GENERAL
INDEX
page
1.
GENERAL
39
2.
WARNINGS
39
2.1
Skilled
personnel
39
2.2
Safety
39
2.3
Responsibility
39
2.4
Particular
warnings
39
3.
APPLICATIONS
39
4.
TECHNICAL
DATA
AND LIMITATIONS OF USE
39
5.
ELECTRICAL CONNECTIONS OF THE A.D. TO THE ELECTROPUMP
40
6.
CONNECTION TO THE POWER SUPPLY LINE
40
7.
HYDRAULIC CONNECTIONS
41
7.4
Risk
of
frost
41
8.
CHARACTERISTICS – INTERPRETATIONS – OPERATION
41
8.1
Characteristics and interpretations
42
8.2
Operation: keyboard factory settings
44
8.3
First switch-on operations (only with A.D. as accessory)
44
8.4
Operation: Parameters for the user (MODE and SET keys for 2 seconds)
45
8.4.1
SP:
Setting the setpoint pressure (in bar)
45
8.5
Operation: Parameters for the installer (MODE and SET and - keys for 5 seconds)
45
8.5.1
rC:
Setting the rated current of the electropump (excluding A.D. M/M 1.1)
45
8.5.2
rt:
Setting the direction of rotation (excluding A.D. M/M 1.1)
45
8.5.3
Fn:
Setting the rated frequency (pre-set value 50Hz)
45
8.5.4
od:
Setting the operating mode of the A.D.
45
8.5.5
rP:
Setting the fall in pressure for restarting
46
8.5.6
Ad:
Setting the interconnection address (excluding A.D. M/M 1.1)
46
8.5.7
Eb:
Enabling booster (pre-set value 2) (excluding A.D. M/M 1.1)
46
8.6
Operation: Technical Assistance displays and settings
(MODE and SET and + keys for 5 seconds)
46
8.6.1
tb:
Setting the reaction time of the water lack blockage
46
8.6.2
GP:
Setting the gain of the proportional coefficient of the PI
46
8.6.3
GI:
Setting the gain of the integral coefficient of the PI
47
8.6.4
FS :
Setting the maximum rotation frequency of the electropump.
47
8.6.5
FL :
Setting the minimum frequency
47
8.6.6
Ft:
Setting the low flow rate threshold
47
8.6.7
CM:
Method of exchange (pre-set value 1) (excluding A.D. M/M 1.1)
47
8.6.8
AE :
Enabling the anti-block/anti-frost function
48
8.6.9
Setting
pump
start
48
8.6.10
SF :
Setting the starting frequency
48
8.6.11
St :
Setting the starting time
48
8.6.12
Setup of the auxiliary digital inputs IN1; IN2; IN3
with the parameters i1; i2; i3
(excluding A.D. M/M 1.1 and A.D. M/T 1.0)
48
8.6.13 Active Driver M/T 2.2
= setting the set point P1 function of input 2
49
8.6.14
O1:
setting output 1 function (active alarm)(excluding A.D. M/M 1.1 and A.D. M/T 1.0)
O2:
setting output 2 function (pump operating)(excluding A.D. M/M 1.1 and A.D. M/T
1.0)
49
9.
DISPLAYS
49
9.1
Displays of the main values (MODE key)
49
Fr:
Display of the current rotation frequency (Hz)
49
UP:
Display of pressure (in bar)
49
C1:
Display of electropump phase current (A)
(excluding A.D. M/M 1.1 and A.D. M/T 1.0)
49
UE:
Display of the version of the software with which the appliance is equipped
49
9.2
Monitor display (SET and - key for 2 seconds)
49
UF:
Display of flow
49
ZF:
Display of zero flow
49
FM:
Display of the maximum rotation frequency (Hz)
49
