D-Link xStack DGS-3426, User Manual

Page: 87 / 356

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
IPv6 Neighbor
IPv6 neighbors are devices on the link-local network that have been detected as being IPv6 devices. These devices can forward
packets and keep track of the reachability of routers, as well as if changes occur within link-layer addresses of nodes on the
network or if identical unicast addresses are present on the local link. The following two windows are used to view IPv6 neighbors,
and add or delete them from the Neighbor cache.
IPv6 Neighbor Settings
The following window is used to view and configure current IPv6 neighbors of the Switch. To view this window, click
Administration > IPv6 Neighbor > IPv6 Neighbor Settings .
Figure 6- 40. IPv6 Neighbor Settings window
The following fields can be viewed:
Parameter Description
Neighbor Displays the IPv6 address of the neighbor device.
Link Layer Address Displays the MAC Address of the corresponding IPv6 device.
Interface
Displays the Interface name associated with this IPv6 address.
State Displays the running state of the corresponding IPv6 neighbor. The user may see six possible
entries in this field, which are
Incomplete, Stale, Probe, Reachable, Delay or Static
.
To remove an entry, click the Delete button for the entry being removed. To completely clear the IPv6 Neighbor Settings , click
the Clear All button. To add a new entry, click the Add button, revealing the following screen to configure:
73