manualshive.com logo in svg

D-Link xStack DGS-3426, User Manual

Share
Download
D-Link xStack DGS-3426 User Manual Download Page 155

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch 

Parameter             Description 

VLAN Name 

This is the VLAN Name that, along with the VLAN ID, identifies the VLAN the user wishes to add. 

VID (2-4094) 

This is the VLAN ID that, along with the VLAN Name, identifies the VLAN the user wishes to add. 

To view the settings for all entries, click on the hyperlinked 

Show IGMP Snooping Multicast VLAN Entries

, which will reveal the 

following window.  

 

Figure 7- 27. IGMP Snooping Multicast VLAN Entries window 

To configure the IGMP Snooping Multicast VLAN settings, click its corresponding 

 button, which will produce the 

following window for the user to configure.

 

 

Figure 7- 28. IGMP Snooping Multicast VLAN Settings - Modify window 

Parameter             Description 

VLAN Name 

This is the VLAN Name that, along with the VLAN ID, identifies the VLAN the user wishes to 
modify. 

VID (2-4094) 

This is the VLAN ID that, along with the VLAN Name, identifies the VLAN the user wishes to 
modify. 

State 

This parameter specifies the state of the configured ISM VLAN. 

Member Ports 

This parameter specifies the member ports of the ISM VLAN, which connects with pc users. 

Tagged 
Member Ports 

This parameter specifies the tagged member ports of the ISM VLAN, which connects with pc 
users. 

Source Ports 

This parameter specifies the source port of the ISM VLAN, which connects with the uplink server. 

141 

     

Summary of Contents for xStack DGS-3426





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands