D-Link xStack DGS-3426, User Manual

Page: 234 / 356

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Interface) application, the Telnet application, SSH and the Web (HTTP) application.
Login Method List Using the pull down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the Login Method Lists window, in this section,
for more information.
Enable Method List Using the pull down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the
Enable Method Lists window, in this
section, for more information
Click Apply to implement changes made.
Authentication Server Group
This window will allow users to set up Authentication Server Groups on the Switch. A server group is a technique used to group
TACACS/XTACACS//RADIUS server hosts into user-defined categories for authentication using method lists. The
user may define the type of server group by protocol or by previously defined server group. The Switch has three built-in
Authentication Server Groups that cannot be removed but can be modified. Up to eight authentication server hosts may be added
to any particular group.
To view the following window, click Security > Access Authentication Control > Authentication Server Group :
Figure 10- 21. Authentication Server Group window
This screen displays the Authentication Server Groups on the Switch. The Switch has four built-in Authentication Server Groups
that cannot be removed but can be modified. To modify a particular group, click its hyperlinked
Group Name , which will then
display the following window.
Figure 10- 22. Add a Server Host to Server Group (XTACACS) window.
220